Forklift Safety Access Cage for 1 & 2 persons Z/STIL/SR163

This forklift safety access cage, also known as a forklift access platform, is safer than a ladder and less expensive and quicker than scaffolding. It has a load capacity of 400kg so and is suitable for 2 persons. There are 2 bars welded in the front 2 corners for lanyard attachment if required.

It features fully enclosed mesh sides to protect the operator. The door opens internally so no-one can fall out, and closes smoothly & automatically with a spring and no vibration. A flick-over catch is also fitted for added protection to stop the forklift cage door accidentally being opened. The upper back section is hinged which allows it to fold flat when not in use saving space. A gas strut is used to hold the forklift cage back vertical - neat!

The Health and Safety Executive publishes guidance identifying appropriate working platform and forklift truck combinations and how they can be used safely together. This contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence.
Working Platforms Guidance

Forklift safety Cage Features include:

• Fork sleeves with mechanism to prevent the cage slipping off the forks.
• Slip proof anti-static rubber mat floor.
• Integrated tool tray as standard.

The safety cage comes complete with user manual, warning signs and identification plate.

Available as an optional extra is a safety harness with lanyard which conforms to european safety standards EN358, EN361 and EN362. The safety access cage can also optionally be fitted with a set of wheels - two fixed and two swivel castors withe 125mm dia wheels - for easy transport around the workplace.

Attention to Detail

The forklift safety access cage comes equipped with an attached plastic tool tray as standard. There is a non-slip anti-static rubber mat on the access cage floor with the exposed edge covered with angle strip - nice touch!

The access door is inward opening only for safety and features a spring return hinge. The mesh fitted in the back panel of the cage is of a narrow pitch to prevent fingers or anything being poked through and becoming trapped in the moving parts of the forklift carriage.

The forklift cage is secured to the forklift carriage with a 20mm shoot bolt. This bolt locates behind the heel of the fork which totally prevents the forklift cage from moving. A chain attaches the bolt to the access cage so it is not lost and, when slid into position, there is an "R" clip which stops the bolt from coming out. When the access cage is not in use, the bolt is safely stored in the section of tube visible in the above image.

There is an alternative securing method. There is a bracket fitted to the cage which allows a chain to be used to secure the access cage to the forklift carriage. This method is only needed if you have some unusual application, for example maybe a telehandler with long fork lengths, or maybe you have a non-standard fork heel design. Please note - Chain not included.

Optional Safety Harness

The optional safety harness ensures safe working at height and has a 2m fixed length rope lanyard. This safety harness conforms to EN 354, EN 361 and EN 358.

Please note, HSE Guidance Note PM28 states "If people have to lean out of the platform to carry out work, or there is a risk of falling out of the platform, they should use a personal work restraint system attached to an anchor point on the platform." For more information about HSE use of forklift access cages, please see link above in yellow box.

Please also note that Working At Height Regulations 2005 require equipment to be inspected at "suitable intervals", and BS EN 365:2004 Personal Protective Equipment Against Falls From Height state"To counter the causes of degradation listed in the Introduction, the British Standard states that components should be examined at least twelve-monthly"

Forklift Safety Access Cage Truck Compatibility

Our forklift safety cage is suitable for most forklift trucks with adjustable forks. The fork pockets are 154mm wide x 54mm high with the distance between the centres of the forks of 720mm

Please note, Some Reach Trucks have narrow fork spacings, please check your truck!!!

For shipping we only charge what it costs us to deliver the platforms. We charge by the pallet to your postcode, which is calculated in the checkout - or you can collect for FREE from our premises in Kettering. Platforms in stock are available immediately, safety cages not in stock have an approx 3 week lead time.

Click the button to view the delivery costs to your location.